| Gas Type | Stikstof (N2) |
|---|---|
| Toepassing | Metalen warmtebehandeling / lasersnijden |
| Type | Plug en play |
| dauwpunt | -40°C |
| Operatiemodus | Automatisch |
| Gebruik | laboratorium |
|---|---|
| Stikstofoutput | 99.99%-99.999% |
| Materiaal | Laboratoriumkwaliteit |
| Toepassing | Stikstofgenerator |
| Zuiverheid | 99.99%-99.999% |
| Capaciteit | Klein |
|---|---|
| Stroombron | Elektrisch |
| Toepassing | Voedselverpakking Stikstofmachine |
| Frequentie | 50/60Hz of aangepast |
| Type | Draagbaar |
| Garantie | 1 jaar |
|---|---|
| Controlesysteem | PLC besturing |
| Gas Type | Stikstof (N2) |
| Debiet | 1-20 Nm3/u |
| Starttijd | ≤13 minuten voor eerste gebruik |
| dauwpunt | -40°C |
|---|---|
| Gas Type | Stikstof (N2) |
| Druk | 00,6-0,8 MPa |
| Koelmethode | luchtkoeling |
| Debiet | 1-20 Nm3/u |
| Drukbereik | 7-9 Bar |
|---|---|
| Operatiemodus | Continu |
| Gas Type | Stikstof |
| Type | generator |
| Veiligheidskenmerken | Automatische uitschakeling |
| Druk | 00,6-0,8 MPa |
|---|---|
| Koelmethode | luchtkoeling |
| Voeding | 220V/50Hz of Aangepast |
| Zuiverheid | 99.99%-99.999% |
| Gas Type | Stikstof (N2) |
| Debiet | 18-33 Nm3/h |
|---|---|
| Druk | 00,6-0,8 MPa |
| Gas Type | Stikstof (N2) |
| Controlesysteem | PLC besturing |
| Voeding | 220V/50Hz of Aangepast |
| Druk | 00,6-0,8 MPa |
|---|---|
| dauwpunt | -40°C |
| Toepassing | Metalen warmtebehandeling / lasersnijden |
| Controlesysteem | PLC besturing |
| Voeding | 220V/50Hz of Aangepast |
| Grootte | Klein |
|---|---|
| Model | N₂ Generator |
| Controlesysteem | PLC's |
| Prestaties | Hoge prestaties |
| Voeding | AC 220V/50HZ of op maat |