| Diemension | 53*43*101cm |
|---|---|
| Air Inlet Pressure | 7~9 Bar, 130~145 PSI |
| Maintenance Cost | Less Than 1% Of Total Investment |
| Operating Temperature | 5-45°C |
| Power Supply | Electricity |
| Air Separation | Yes |
|---|---|
| Power Source | Electric |
| Booster | Yes |
| Application | Laser Cutting Or New Material Making |
| New Material Making | Yes |
| Working Temperature | 5-45℃ |
|---|---|
| Air Pressure | 0.7-1.0MPa |
| Laser Cutting | Yes |
| New Material Making | Yes |
| Dew Point | ≤-40℃ |
| Technology | Advanced |
|---|---|
| Profit | Increased |
| Production Costs | Minimized |
| Application | Laser Cutting |
| Efficiency Ratio | Optimized |
| Pressure | 0.6-0.8 MPa |
|---|---|
| Cooling Method | Air Cooling |
| Power Supply | 220V/50Hz Or Customized |
| Purity | 99.99%-99.999% |
| Gas Type | Nitrogen (N2) |
| Pressure | 0.6-0.8 MPa |
|---|---|
| Dew Point | -40℃ |
| Application | Metal Heat Treatment / Laser Cutting |
| Control System | PLC Control |
| Power Supply | 220V/50Hz Or Customized |
| Dew Point | ≤-40℃ |
|---|---|
| Air Pressure | 0.7-1.0MPa |
| Laser Cutting | Yes |
| Power Requirement | 220V/ Or Customized |
| Air Flow | 18-33Nm3/h |
| Nitrogen Supply Method | Continuous |
|---|---|
| Weight | 100 Kg |
| Material | Stainless Steel |
| Dimensions | 540mm X 420mm X 1060mm |
| Output Pressure Stability | Stable |
| Pressure Control Accuracy | ±1% |
|---|---|
| Gas Source Connection | 1/4 |
| Output Pressure Stability | Stable |
| Pressure Range | 2-6 Bar |
| Pressure Control Mode | Manual |
| Dimensions | 540mm X 420mm X 1060mm |
|---|---|
| Nitrogen Supply Method | Continuous |
| Output Pressure Stability | Stable |
| Gas Source Connection | 1/4 |
| Weight | 100 Kg |